Marinews
Login | Contact Us | Site Map | Link to Site   
Marinews
MARINEWS
   
BOATING
   
FISHING
   
EXPLORING
   
FORUM
   
WEATHER
   
TRAILERBOAT FISHERMAN
   
AUSTRALIAN BOATING
   
JUST FOR FUN
   
LOGIN
   
CATALOGUES
   
CONTACT US
   
SITE MAP
   


 

Racking Bend

 
 
Copyright @ Marinews Pty Ltd 2009 . All Rights Reserved. All material displayed is the property of Marinews Pty Ltd. All copyright violation will be dealt with firmly. If you suspect our copyright has been violated, please email: copyright@marinews.com Thank you.
 
Glossary   A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
 

Racking Bend

The Racking Bend is more secure than the sheet bend and is well suited to attaching lighter cordage to heavier (larger) hawser. The Racking Bend does not require seizing as each turn of racking is hove on as it is laid and this, if pulled tight in construction, draws the looped hawser snuggly together.
Use at least four turns in the Racking Bends construction, more on heavier hawser. The Racking Bend can be completed with either a half hitch around the hawser or stopped.

About Rope Knots

Regardless of your situation at some point in your life you’ll encounter a thread, cord or rope knot. Research records of archaeologist J Wymer shows records of knots as far back as 380,000 years ago! Some of these knots are as described, as used then, on this site.

 

Your life will be made easier and safer with some knowledge of how to tie a knot.

This site holds over 250 different animated knots. That is more than most could be expected to reasonably use. However, the question still remains; for the situation you currently find yourself, which knot should you use?

It is my hope that the animated illustrations provided on this site will assist and encourage you to extend your knot tying skills.

Rope knots can basically be divided into the following groups:

  1. Bends    - Joining two lines by intertwining them, without splicing, or sewing.
  2. Hitches  - A knot that secures a rope or line to another object.
  3. Stopper  – Used to bind strands at the end of a rope to stop fraying or unraveling.
               Also formed to stop a rope slipping through a hole or to provide a weight or handhold.
  4. Bindings – Much like hitches. They are used to bind either lines or objects together. Their aim is
               to keep objects in place.
  5. Splices  – Describes the act of joining the ends, or the end and a standing part, of rope by
               interweaving strands. They are not knots in themselves.
  6. Loops    – Loops create structures used to tie, or secure, another object or line to another line.
               They can be formed at the end or midway a length of rope.
  7. Plaits   - Weaving several lines together to form a pattern and a cohesive structure.
  8. Miscellaneous & Decorative – Knots that have decorative, dress or multiple category
               characteristics.

The rope knot section of this site is set out with these groups firmly in mind.

Good luck

Andy

Marinews | Boat Test | Boating Articles | Exploring Articles | Fishing Articles | Knots | Rigs | Links | Forum