Marinews
Login | Contact Us | Site Map | Link to Site   
Marinews
MARINEWS
   
BOATING
   
FISHING
   
EXPLORING
   
FORUM
   
WEATHER
   
TRAILERBOAT FISHERMAN
   
AUSTRALIAN BOATING
   
JUST FOR FUN
   
LOGIN
   
CATALOGUES
   
CONTACT US
   
SITE MAP
   


 

Sheet Bend


Also known as: The Bend; Simple Bend; Ordinary Bend; Common Bend; Single Bend
 
 
Copyright @ Marinews Pty Ltd 2008 . All Rights Reserved. All material displayed is the property of Marinews Pty Ltd. All copyright violation will be dealt with firmly. If you suspect our copyright has been violated, please email: copyright@marinews.com Thank you.
 
Glossary   A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
 

Sheet Bend

The Sheet Bend serves almost every purpose well providing it is tied with two ends of similar material. The ends do not however have to be of the same diameter, in fact the Sheet Bend is excellent for joining similar materials of differing sizes.
Whether tied as an extension to weaving or knotting yarn, to haul a hawser from a large vessel etc., the Sheet Bend should be tied with both ends on one side of the knot. Experiments by Cyrus Day, way back in 1935 revealed that when tied with ends on opposing sides, the knot tend to give way more readily.

About Rope Knots

Regardless of your situation at some point in your life you’ll encounter a thread, cord or rope knot. Research records of archaeologist J Wymer shows records of knots as far back as 380,000 years ago! Some of these knots are as described, as used then, on this site.

 

Your life will be made easier and safer with some knowledge of how to tie a knot.

This site holds over 250 different animated knots. That is more than most could be expected to reasonably use. However, the question still remains; for the situation you currently find yourself, which knot should you use?

It is my hope that the animated illustrations provided on this site will assist and encourage you to extend your knot tying skills.

Rope knots can basically be divided into the following groups:

  1. Bends    - Joining two lines by intertwining them, without splicing, or sewing.
  2. Hitches  - A knot that secures a rope or line to another object.
  3. Stopper  – Used to bind strands at the end of a rope to stop fraying or unraveling.
               Also formed to stop a rope slipping through a hole or to provide a weight or handhold.
  4. Bindings – Much like hitches. They are used to bind either lines or objects together. Their aim is
               to keep objects in place.
  5. Splices  – Describes the act of joining the ends, or the end and a standing part, of rope by
               interweaving strands. They are not knots in themselves.
  6. Loops    – Loops create structures used to tie, or secure, another object or line to another line.
               They can be formed at the end or midway a length of rope.
  7. Plaits   - Weaving several lines together to form a pattern and a cohesive structure.
  8. Miscellaneous & Decorative – Knots that have decorative, dress or multiple category
               characteristics.

The rope knot section of this site is set out with these groups firmly in mind.

Good luck

Andy

Marinews | Boat Test | Boating Articles | Exploring Articles | Fishing Articles | Knots | Rigs | Links | Forum