This method of tying the bowline knot is preferred by climbers as it is quick and effective.
Step 1Form an Overhand clockwise loop in your rope.
Step 2Form a bight in the standing line above the loop created in step 1 and pass that bight through the loop.
Step 3Pass the working end up through the bight that has been pulled through the loop, but do not take it through the loop created in step 1.
Step 4Lay the working end back along its self. Hold firmly the working end and the ropes forming the two sides of the bowlines loop.
Step 5Pull firmly on the standing end and the bowline knot will form.
This method of tying the bowline knot is preferred by climbers as it is quick and effective. The resulting knot is identical to the standard bowline as shown on this site. Practicing this method is highly recommended.
About Rope Knots
Regardless of your situation at some point in your life you’ll encounter a thread, cord or rope knot. Research records of archaeologist J Wymer shows records of knots as far back as 380,000 years ago! Some of these knots are as described, as used then, on this site.
Your life will be made easier and safer with some knowledge of how to tie a knot.
This site holds over 250 different animated knots. That is more than most could be expected to reasonably use. However, the question still remains; for the situation you currently find yourself, which knot should you use?
It is my hope that the animated illustrations provided on this site will assist and encourage you to extend your knot tying skills.
Rope knots can basically be divided into the following groups:
Bends - Joining two lines by intertwining them, without splicing, or sewing.
Hitches - A knot that secures a rope or line to another object.
Stopper – Used to bind strands at the end of a rope to stop fraying or unraveling.
Also formed to stop a rope slipping through a hole or to provide a weight or handhold.
Bindings – Much like hitches. They are used to bind either lines or objects together. Their aim is
to keep objects in place.
Splices – Describes the act of joining the ends, or the end and a standing part, of rope by
interweaving strands. They are not knots in themselves.
Loops – Loops create structures used to tie, or secure, another object or line to another line.
They can be formed at the end or midway a length of rope.
Plaits - Weaving several lines together to form a pattern and a cohesive structure.
Miscellaneous & Decorative – Knots that have decorative, dress or multiple category
The rope knot section of this site is set out with these groups firmly in mind.
ABOUT THE AUTHOR
Andrew Galwey is the publisher of Australia’s most successful trailer boating publication, Trailerboat Fisherman and Australian Boating, a publication dedicated to the cruiser enthusiast. He developed the Internet site www.marinews.com back in 1996 as a window to pass on some of his skills. Fishing, boating and the art of knot tying are certainly skills he’s mastered well. As a fishing enthusiast, fishing both commercially and recreationally, Andy developed a fascination and skill for the art of knot tying. His 40 years of both working the land and boating has seen those knot tying skills extended way beyond fishing knots and into the world of rope knots as well.
He’s a member of the Pacific Americas Branch of the International Guild of Knot Tyers and encourages anyone with a knot tying interest to visit their website (www.igktpab.org).
Marinews would like to thank Andy for his support and hope you not only learn from this excellent section on knot tying but also get many hours of enjoyment from it.
Any Questions? Visit our Forum.