Home  |  About  |  Contact  | 
 
Trailerboat Fisherman

Wind on Leader

JW Player goes here

The Wind on Leader allows for loop to loop connections of leader to doubles, usually used in light to heavy game fishing situations.

Step 1:

Step 1:

Form Tanakas Loop (see Rigging/Game and Sport section for formation steps)

Step 2:

Step 2:

Insert the tapered monofilament into the short end of the dacron sleeve using a needle. Thread the monofilament into the dacron to a point that the longer bunched end of the dacron can be pushed over the tapered end of the monofilament. Seal the monofilam

Step 3:

Step 3:

Tie a loop (pull-through) in the finer binding line for later use. Bind tightly over the join between the dacron and the leader making sure you over-bind both sections. After the join is sufficiently bound, over-bind the pull-through for at least one thir

Step 4:

Step 4:

Using the pull-through, pull the working end of the binding line back through and underneath the over bound section to secure.

Step 5:

Step 5:

Pull the tags tight both ends. Trim both tags short, leaving just the binding over the join.

Step 6:

Step 6:

Apply the optional pliable rubber sealant over the binding.

Step 7:

Step 7:

The wind on leader is complete and ready for use.

Popular knots

More knots

Knots Description

Wind on Leader

The Wind on Leader allows for loop to loop connections of leader to doubles, usually used in light to heavy game fishing situations. The formation process requires the attaching of a leader to looped dacron. The looped dacron is formed via the formation of Tanakas Loop (see Rigging/Game and Sport section). The leader is then inserted into the dacron, glued and over-bound with a fine line at the point of joining between the dacron and leader lines. The binding is best completed with the application of a pliable sealant, although this is optional. A needle, high strength glue, fine line for binding and optional sealant will be required to form a Wind on Leader.

Line Classes:                               Medium to Heavy
Line types:                                    Monofilament
Retained Breaking Strength:   N/A
Application:                                  Forming a wind on leader.

About Knots

Regardless of your situation at some point in your life you’ll encounter a thread, cord or rope knot. Research records of archaeologist J Wymer shows records of knots as far back as 380,000 years ago! Some of these knots are as described, as used then, on this site.

Your life will be made easier and safer with some knowledge of how to tie a knot.

This site holds over 250 different animated knots. That is more than most could be expected to reasonably use. However, the question still remains; for the situation you currently find yourself, which knot should you use?

It is my hope that the animated illustrations provided on this site will assist and encourage you to extend your knot tying skills.

Rope knots can basically be divided into the following groups:

  1. Bends    - Joining two lines by intertwining them, without splicing, or sewing.
  2. Hitches  - A knot that secures a rope or line to another object.
  3. Stopper  – Used to bind strands at the end of a rope to stop fraying or unraveling.
               Also formed to stop a rope slipping through a hole or to provide a weight or handhold.
  4. Bindings – Much like hitches. They are used to bind either lines or objects together. Their aim is
               to keep objects in place.
  5. Splices  – Describes the act of joining the ends, or the end and a standing part, of rope by
               interweaving strands. They are not knots in themselves.
  6. Loops    – Loops create structures used to tie, or secure, another object or line to another line.
               They can be formed at the end or midway a length of rope.
  7. Plaits   - Weaving several lines together to form a pattern and a cohesive structure.
  8. Miscellaneous & Decorative – Knots that have decorative, dress or multiple category
               characteristics.